0845 0722778

SEG Fabric Wall-Mounted Lightboxes

Make your message clearly stand out with these vibrant backlit displays

  • Frame Quality

£378.00

Our wall-mounted backlit systems consist of an aluminium extrusion frame kit, and a SEG tension fabric graphic. The frame is 75mm thick for the standard and 60mm thick for the premium, and should be fitted to a solid wall.

The fabric graphic is printed using a dye-sublimation process onto 310gsm Backlit Polyester. This process gives the image great vibrancy and is finished with a silicone edging (kedar). The graphic is then slotted into the aluminium channel and tensioned around the edge.

The result is a beautifully-finished, vibrant and seamless solution. Perfect for store all manner of applications including displays and exhibitions. Graphics are easily replaceable by existing ground staff, negating the need for skilled installers.

Lumens, quality and number of LEDs used are the main differences between the standard and premium models. The LED lights are located around the inside edge of the frame meaning they are edge-lit. Premium models have lights along the long edges for better light quality. Lightboxes are supplied in sections and require some assembly with the provided allen key.

A nylon pull tab is fitted to each Lightbox graphic as standard. This aids easy removal of the graphic from the frame, which can be tricky otherwise. By default, this is affixed to an upper corner of the graphic to prevent children reaching it. Please let us know if you would prefer the pull tab to be located elsewhere or not supplied at all.

Lighting anomalies can be highlighted with plain designs or large blocks of a single colour. It is therefore recommended to use busy, vibrant designs for best results.

What You Get

  • Aluminium frame in sections
  • Pre-installed LED lights to the inside of the frame
  • CE marked transformer and fitted UK plug
  • Approximately 3 meters cable length
  • Allen key
  • x1 Dye-sublimation printed graphic

Notice

The aluminium frame will require drilling to create your own fixing points. This allows for maximum hanging flexibility for various wall surfaces. As the aluminium frame does not have any standard fixing points we do not provide a wall-mounting kit.

Artwork Requirements

To create your artwork for the SEG Fabric Free-Standing Lightboxes, please make any designs to the size of the frame being ordered (e.g. 1m × 2m) and according to our usual artwork setup and artwork requirements, and add 30mm of bleed (rather than the usual 5mm).

Avoid including any crop marks or other registration marks in your exported print-ready file.

Please note that with some inherent movement in printing, cutting and finishing, designs should not be made in such a way that they rely on proximity to the edge of the frame. Around 14mm around the outside of the cut fabric is used for the silicone edge and is hidden in the frame channel.

We recommend using a safe area of at least 50mm from the edge of your design.

Name Standard 1x3 Standard 2x3 Standard 3x3 Premium 1x3 Premium 2x3 Premium 3x3
Overall Width 1000mm 2000mm 3000mm 1000mm 2000mm 3000mm
Overall Height 2000mm 2000mm 2000mm 2000mm 2000mm 2000mm